I just set up my new rotary indexer. I set the file up to run in the X axis. I used the wrapping gadget and selected the raster machining method. The indexer is rotating 360 degrees, the router is advancing in the Y axis about 0.1" and not at all in the X axis.
Before connecting the indexer I have run the machine for about 16 years without any similar issues. Something is wrong and I don't know where to look.
The machine is a Shopbot Benchtop PRT, 4G.
I think the problem is with the Post Processor. The preview in Aspire looks fine. The Shopbot software has it's own previewer which shows a different preview than Aspire.

Phil