Sawhorse Challenge

[EricSchimel]

I did a minor update to the file:

https://drive.google.com/open?id=0B-...jVVeDB1SkhONEU

The only thing that's changed is the weld nut slot is a little wider. This way if you don't want to use, or can't get a weld nut you can use a 1/4x20 nut and just grind down a washer a little bit.

Photo_-_Google_Photos.jpg

[EricSchimel]

Did anyone make a set of these yet?

[bbrozo]

Eric -

I've saved your files and plan to build a couple soon but have alot of other projects going on right now but will post once I have.

Bill