24" Z-Axis! PRS Alpha (2013) 48" x 96"

[JDRoberts]

Currently set up as a 8" Z height. Can easily be switched back to a 24" or anything you like. Have the 24" Z axis installed and have the pair of extrusions to raise the gantry up. You will need to buy or build legs to adjust to the height you like if you want it more than 8".
1.7KW HSD Spindle runs great. All cutting was either HDU, foams or HDPE plastic at .1 deep. So, no hard abuse or mass production on machine.

Price: $16500 obo
open to trade smaller format machine (ie, 4X4, buddy 32) and cashSB2RT.jpgIMG-2344.jpg

[andrius.ack]

machine location?

[JDRoberts]

Located in Mesa Arizona.

[JDRoberts]

Couple pics in it's 24" configuration.

IMG-2393.jpgIMG-2392.jpg

[evan]

How do you lower the deck? Manually?

[JDRoberts]

Table currently fixed at 8" you can buy or make longer legs and move the 2 gantry's up. As in the second pics posted.

[JDRoberts]

Price Lowered to $14,000, good deal for someone in the market for a PRS Alpha. Machine is paid for, don't need to sell just wanting to make some space and down sizing.

[JDRoberts]

Sold, thanks everyone.

[JDRoberts]

Local sale fell through creating new post.

[Mavigogun]

Do you have any images without the tool bed? I'd like to see how much space there is below the table for indexing long cuts.