Working on new to me CNC with indexer

[bryan]

Have what I believe is a PRS Shopbot with indexer and air drill, the company that was was using it never got to the indexer other then getting it setup on the table and wired to the driver. Currently is only spins when you change the A drive, in the manual is tells you that if you have a prs and this is the case vs the B drive to call Shopbot, well it the weekend and like a dumb bunny I took on a order of 45 cradle spindles and would like to get this up tomorrow to take some heat off the PRT indexer that working on them as well. Does anyone remember having this issue and what shopbot told you to do? If you don't remember I'll be calling Shopbot Tech support Monday morning, Note the MA command work great and it spin, but when you do a MB the digits move but the indexer does nothing.

I've added and image of the driver that the indexer cable is running to, just in case that helps,

[bryan]

After a few emails from tech support this issue has been resolved, now to get the second indexer fine tuned like my older PRT indexer that just keeps on carving and carving.